# EV Charger Installation in Broken Arrow and Tulsa > Level 2 home charger circuits installed after a load check of your panel. You choose the charger; we install the 240-volt circuit and mount it. Canonical page: https://hotshotelectrical.com/ev-charger-installation/ Hot Shot Electric Service Co. is a family-owned electrical contractor in Broken Arrow, Oklahoma, founded August 1, 1995. Oklahoma Electrical Contractor License #26574, bonded and insured. BBB A+ accredited. Rated 4.9 stars across 247 Google reviews. Address 9203 S 241st E Ave, Broken Arrow, OK 74014. Phone (918) 261-8024. Hours: Monday to Friday, 8:00 AM to 4:30 PM. Closed Saturday and Sunday. Urgent problems (no power, a burning smell, a hot panel, storm damage) are worked the same day during business hours. Calls after hours go to voicemail and are returned first thing the next business morning. You pick the charger. We check that your panel can carry it, run the dedicated 240-volt circuit, mount the unit and make sure it charges the way the manufacturer intends. ## EV charger installation in Broken Arrow and Tulsa Charging an electric vehicle from a regular outlet is slow. A Level 2 charger on a 240-volt circuit can fill most cars overnight. Hot Shot Electric Service Co. handles **EV charger installation** for homes in Broken Arrow, Coweta, Tulsa and the surrounding towns. You choose the charger that fits your car and your budget; we check that your panel can carry it, run the dedicated circuit, mount the unit and make sure it charges the way the manufacturer intends. **You pick the charger, we install it** We do not sell chargers. Buy the charger you want, from the carmaker or a retailer, and we install it. That way you are not locked into a brand we happen to stock. ## Level 1 vs Level 2 charging Level 1 is the cord that comes with the car, plugged into a standard 120-volt outlet. It adds only a few miles of range per hour. Level 2 uses a 240-volt circuit, typically on a 40 to 60 amp breaker depending on the charger, and charges several times faster. For most drivers, Level 2 at home means leaving every morning with a full battery. ## Start with a load check A Level 2 charger is a large load that can run for hours, so the first step is making sure your panel and service can carry it alongside everything else. We look at the panel's size, its open spaces and the home's existing load. Many homes have plenty of room. Some need a subpanel, a load management device, or an [electrical panel upgrade](https://hotshotelectrical.com/services/electrical-panel-upgrade/). We explain the options before recommending anything costly. ## Hardwired charger or NEMA 14-50 outlet Some chargers plug into a 240-volt outlet, usually a NEMA 14-50, and some are hardwired. Hardwiring is often the cleaner choice for a permanent garage charger and lets some units charge at a higher rate. A 14-50 outlet makes sense if you might take the charger with you or want flexibility. We install either, following the charger manufacturer's instructions for the circuit size. ## How an EV charger install works 1. Tell us the charger model and where you park. 2. We do the load check and give you the price before any work starts. 3. We install the dedicated circuit and breaker, run the wire to the charger location, and mount the unit or the outlet. 4. We pull the permit where the city requires it. 5. We power it up, confirm it charges, and walk you through it. Customers who have had us install EV chargers, new GFCIs and similar work describe good service and good pricing, and one noted the crew did not mind working around a home solar system. ## Surge protection and the charger An EV charger is expensive electronics plugged into your house's wiring. On a recent EV outlet project, we added a dedicated breaker for the outlet and installed an Eaton surge protective device at the panel to guard against power surges. [Whole-house surge protection](https://hotshotelectrical.com/services/whole-house-surge-protection/) is worth considering whenever a charger goes in, especially in Oklahoma storm season. ## Garage, driveway or detached shop Most chargers go on a garage wall near where the car parks. Outdoor installs need a charger rated for outdoor use and the right enclosure. Detached garages and shops may need a feeder or a subpanel first. We will tell you which applies to your setup when you call. ### How long the install takes When the panel has room and the charger mounts near it, most garage installs take a few hours. Longer runs across a finished garage, a charger on the far side of the house, or a needed subpanel add time. You will know before we start, because the scope and price are set after the load check. ### Charging more than one car Households with two electric vehicles have options: two chargers on separate circuits if the panel can carry them, or chargers that share one circuit and split the power between cars. The load check tells us which makes sense for your house. Planning for a second car now, even if it is a year or two away, can save running a second circuit later. ### Permits and inspection A new 240-volt circuit generally needs a permit in Broken Arrow, Tulsa and the surrounding cities. We pull it and schedule the inspection, so the charger is documented the same way any other circuit would be. That matters for insurance, and it matters when you sell the house with the charger staying on the wall. ### Charging habits and circuit size Most drivers do not need the fastest possible home charger. Plugging in each evening on a moderate Level 2 circuit refills a typical day's driving overnight. Sizing the circuit to the charger and how you drive keeps the installation simpler and leaves room in your panel for other loads. We will talk through your daily miles and the charger's specifications before choosing the breaker size. ## Commercial and rental properties Landlords and small businesses ask about chargers too. For light commercial charging needs, see [commercial electrical services](https://hotshotelectrical.com/services/commercial-electrical/). If you are still deciding on a car or a charger, call before you buy. A quick look at your panel tells you whether the charger you want will fit as is, or whether a subpanel or a different circuit size is the smarter plan. That conversation is free, and it often saves buying equipment twice. Garages in older homes sometimes share a circuit with laundry or freezers. A charger always gets its own circuit, so it never competes with them. We serve EV owners across Broken Arrow, Coweta, Tulsa, Bixby, Jenks, Owasso and the surrounding towns. Call (918) 261-8024 with your charger model and we will tell you what the job looks like. ## Frequently asked questions ### Do you sell EV chargers? No. You choose and buy the charger, and we install it. That keeps you free to pick the one that fits your car and budget. ### What do I need for a Level 2 charger at home? A dedicated 240-volt circuit, typically on a 40 to 60 amp breaker depending on the charger, and a panel with enough capacity and space. We check both before installing. ### Will I need a panel upgrade for an EV charger? Not always. Many homes have room. If yours is close to capacity, there are options such as a subpanel or a load management device before a full upgrade. ### Should my charger be hardwired or plugged in? Both work. Hardwiring is often cleaner for a permanent garage charger and can allow a higher charge rate on some units. A NEMA 14-50 outlet gives flexibility if you may move the charger. ### How long does an EV charger installation take? Most garage installs take a few hours once the circuit is planned. Longer runs or a needed subpanel add time, and you will know before we start. ## Related pages - [Electrical Panel Upgrade and Replacement in Tulsa](https://hotshotelectrical.com/services/electrical-panel-upgrade.md) - [Whole House Surge Protection Tulsa OK](https://hotshotelectrical.com/services/whole-house-surge-protection.md) - [Generator Transfer Switch Install Broken Arrow OK](https://hotshotelectrical.com/services/generator-transfer-switch.md) - [Circuit Breaker Installation and Repair in Tulsa, OK](https://hotshotelectrical.com/circuit-breaker-replacement-and-repairs.md) - [What a Level 2 EV Charger Needs at Home](https://hotshotelectrical.com/answers/what-a-level-2-ev-charger-needs.md) ## Contact - Hot Shot Electric Service Co., 9203 S 241st E Ave, Broken Arrow, OK 74014 - Phone: (918) 261-8024 - Email: johnbrown@hotshotelectrical.com - Hours: Monday to Friday, 8:00 AM to 4:30 PM. Closed Saturday and Sunday. - Request service: https://hotshotelectrical.com/contact-us/