# Electrician in Claremore, OK

> Licensed electricians for Claremore, the Rogers County seat: repairs, rewiring, panels, surge protection and lighting, with the price first. (918) 261-8024.

Canonical page: https://hotshotelectrical.com/service-areas/claremore-electrician/

Hot Shot Electric Service Co. is a family-owned electrical contractor in Broken Arrow, Oklahoma, founded August 1, 1995. Oklahoma Electrical Contractor License #26574, bonded and insured. BBB A+ accredited. Rated 4.9 stars across 247 Google reviews. Address 9203 S 241st E Ave, Broken Arrow, OK 74014. Phone (918) 261-8024. Hours: Monday to Friday, 8:00 AM to 4:30 PM. Closed Saturday and Sunday. Urgent problems (no power, a burning smell, a hot panel, storm damage) are worked the same day during business hours. Calls after hours go to voicemail and are returned first thing the next business morning.

Claremore is about 20 miles north of our Broken Arrow office, up through Catoosa and Verdigris. We plan Claremore jobs ahead so one trip does the work, and you know the price before it starts.

Claremore is in Rogers County, Oklahoma (population 19,580 (2020 census), 2020 census). Claremore is the county seat of Rogers County, home of Rogers State University and the Will Rogers Memorial Museum, with 19,580 residents at the 2020 census. It has an established core of older homes along with newer growth, so our work there runs from rewiring to additions.

## Claremore electricians who plan the trip

Hot Shot Electric Service Co. is a family-owned electrical contractor based in Broken Arrow, about 20 miles south of Claremore. We have held Oklahoma electrical contractor license #26574 since 1995. Claremore is one of the farther towns we serve, so we treat the phone call as part of the job: we ask what is happening, what you have tried, how old the house is and what the panel looks like. The licensed journeyman then arrives with the right parts and time to finish.

## An old county seat with old wiring and new growth

Claremore is the county seat of Rogers County, sitting in the foothills of the Ozarks along old Route 66 and Interstate 44. It is home to Rogers State University and the Will Rogers Memorial Museum, and it has been a town for well over a century. That age shows in the housing. Around the older parts of town, it is common to find homes whose wiring was extended room by room over the decades, panels that have run out of space, and outlets with no ground. Newer growth around the edges of the city brings the opposite request: adding car chargers, shop circuits and patio fans.

## What we do for Claremore homes

These are the Claremore requests we see most, in roughly the order we see them:

1. **Troubleshooting** a circuit that died, lights that flicker, or a breaker that will not hold. See [troubleshooting and repair](https://hotshotelectrical.com/services/electrical-troubleshooting-repair/).
2. **Rewiring and wiring repair** for older homes: ungrounded circuits, loose or overloaded connections, splices without boxes. See [wiring and rewiring](https://hotshotelectrical.com/services/whole-home-rewiring/).
3. **Panel upgrades** when the panel is full, aging or flagged by an inspector or insurer. See [panel upgrades](https://hotshotelectrical.com/services/electrical-panel-upgrade/).
4. **Surge protection** after lightning takes out an appliance, HVAC board or electronics. See [whole-house surge protection](https://hotshotelectrical.com/services/whole-house-surge-protection/).
5. **Lighting** inside and out, from a single fixture to recessed lighting through a remodel. See [lighting installation](https://hotshotelectrical.com/lighting-installation/).

**Rewire, or repair?** An older home does not automatically need a full rewire. An [electrical safety inspection](https://hotshotelectrical.com/services/electrical-safety-inspection/) tells you which circuits are fine, which need attention now, and which you can plan for. Many homeowners end up fixing a handful of problems and leaving the rest alone.

## Permits in Claremore

The City of Claremore issues electrical permits through its Community Development Services office, which runs an online permit portal. Panel replacements, service upgrades and new circuits generally need a permit; small like-for-like repairs usually do not. When one is required, we pull it and schedule the inspection. The city's permits page is linked below under local resources.

## Warning signs in an older Claremore home

Older wiring rarely fails all at once. It gives warnings, and most of them are easy to spot:

- Switch plates or outlet covers that feel warm to the touch.
- Lights that dim when the air conditioner or the microwave starts.
- Outlets that will not hold a plug, or that have brown or black marks.
- Two-prong outlets throughout the house, or three-prong outlets with no ground behind them.
- A burning plastic smell with no obvious source.
- Fuses instead of breakers, or a panel with no open spaces left.

A burning smell or a scorched outlet is urgent: turn off that breaker if you safely can and call. The rest are worth an inspection so you can decide what to fix and when, instead of finding out the hard way.

## Remodels and additions

When a Claremore home gets a new kitchen, a finished room or an addition, the electrical work is the time to fix what the old wiring could not handle. New circuits sized for today's appliances, GFCI protection where the code wants it, and lighting planned before the walls close. We work with your contractor or directly with you, and we pull the permit.

## Light commercial in Claremore

About one job in ten we do is commercial: small shops, offices, retail spaces and owners with a few rental units. In a county seat with an older downtown, that usually means lighting, added circuits, failing breakers and panels that have been asked to do more than they were built for. We schedule around your business hours where we can. See [commercial electrical](https://hotshotelectrical.com/services/commercial-electrical/).

## After lightning

If a storm took out an appliance, a garage door opener or an HVAC control board, have the panel and the affected circuits checked, especially if you plan an insurance claim. Then protect the house with a surge protective device at the panel. See [whole-house surge protection](https://hotshotelectrical.com/services/whole-house-surge-protection/).

Claremore homeowners also ask us about adding circuits for things the original house never planned for: a home office full of equipment, a window unit in a back bedroom, a freezer in the garage. A dedicated circuit is usually a short job, and it ends the tripping for good.

Whatever the job, our office prices it by phone before anyone drives north, and the journeyman on site will walk you through the details again before he starts.

## Costs and scheduling

Planned work gets a free estimate. Troubleshooting carries a diagnostic fee, which includes a roughly 20-point safety inspection of the home, and you approve the repair price before any work starts. Manufactured items we install carry a one-year warranty, and we offer financing on larger jobs.

We work Monday to Friday, 8:00 AM to 4:30 PM. Because of the drive, the best way to get a Claremore job on the schedule is to call early in the day: (918) 261-8024. You can also [send a request](https://hotshotelectrical.com/contact-us/) with your address and the service you need.

## Services in Claremore

- [Electrical Rewiring and Wiring Repair in Tulsa, OK](https://hotshotelectrical.com/services/whole-home-rewiring.md)
- [Electrical Panel Upgrade and Replacement in Tulsa](https://hotshotelectrical.com/services/electrical-panel-upgrade.md)
- [Electrical Troubleshooting and Repair in Tulsa, OK](https://hotshotelectrical.com/services/electrical-troubleshooting-repair.md)
- [Whole House Surge Protection Tulsa OK](https://hotshotelectrical.com/services/whole-house-surge-protection.md)
- [Electrical Safety Inspection Tulsa OK](https://hotshotelectrical.com/services/electrical-safety-inspection.md)
- [Lighting Installation Broken Arrow OK](https://hotshotelectrical.com/lighting-installation.md)

## Local resources

- City of Claremore permits and applications: https://claremore.com/community-development-services/permits-applications/
- Rogers County: https://rogerscounty.org/
- Wikipedia: https://en.wikipedia.org/wiki/Claremore,_Oklahoma

## Frequently asked questions

### Where do I get an electrical permit in Claremore?

The City of Claremore handles permits through its Community Development Services office and online permit portal. When a job needs a permit, such as a panel replacement, a service upgrade or new circuits, we pull it and schedule the inspection.

### How far is Claremore from your office?

About 20 miles north of our office in Broken Arrow. We schedule Claremore work ahead and ask enough questions on the phone that the journeyman arrives ready to finish, whenever the job allows.

### Should an older Claremore home be rewired?

Not necessarily. Many older homes need specific repairs, not a full rewire. An electrical safety inspection tells you which circuits are fine, which need work now and which you can plan for.

## Contact

- Hot Shot Electric Service Co., 9203 S 241st E Ave, Broken Arrow, OK 74014
- Phone: (918) 261-8024
- Email: johnbrown@hotshotelectrical.com
- Hours: Monday to Friday, 8:00 AM to 4:30 PM. Closed Saturday and Sunday.
- Request service: https://hotshotelectrical.com/contact-us/