Skip to content

Claremore, Rogers County

Electrician in Claremore, OK

Claremore is about 20 miles north of our Broken Arrow office, up through Catoosa and Verdigris. We plan Claremore jobs ahead so one trip does the work, and you know the price before it starts.

Open gray residential breaker panel with handwritten circuit labels and a main breaker

Claremore electricians who plan the trip

Hot Shot Electric Service Co. is a family-owned electrical contractor based in Broken Arrow, about 20 miles south of Claremore. We have held Oklahoma electrical contractor license #26574 since 1995. Claremore is one of the farther towns we serve, so we treat the phone call as part of the job: we ask what is happening, what you have tried, how old the house is and what the panel looks like. The licensed journeyman then arrives with the right parts and time to finish.

An old county seat with old wiring and new growth

Claremore is the county seat of Rogers County, sitting in the foothills of the Ozarks along old Route 66 and Interstate 44. It is home to Rogers State University and the Will Rogers Memorial Museum, and it has been a town for well over a century. That age shows in the housing. Around the older parts of town, it is common to find homes whose wiring was extended room by room over the decades, panels that have run out of space, and outlets with no ground. Newer growth around the edges of the city brings the opposite request: adding car chargers, shop circuits and patio fans.

What we do for Claremore homes

These are the Claremore requests we see most, in roughly the order we see them:

  1. Troubleshooting a circuit that died, lights that flicker, or a breaker that will not hold. See troubleshooting and repair.
  2. Rewiring and wiring repair for older homes: ungrounded circuits, loose or overloaded connections, splices without boxes. See wiring and rewiring.
  3. Panel upgrades when the panel is full, aging or flagged by an inspector or insurer. See panel upgrades.
  4. Surge protection after lightning takes out an appliance, HVAC board or electronics. See whole-house surge protection.
  5. Lighting inside and out, from a single fixture to recessed lighting through a remodel. See lighting installation.
Rewire, or repair?An older home does not automatically need a full rewire. An electrical safety inspection tells you which circuits are fine, which need attention now, and which you can plan for. Many homeowners end up fixing a handful of problems and leaving the rest alone.
Outdoor kitchen island with a stainless grill, kamado smoker and stone countertop, with an outlet box on the stucco base

Permits in Claremore

The City of Claremore issues electrical permits through its Community Development Services office, which runs an online permit portal. Panel replacements, service upgrades and new circuits generally need a permit; small like-for-like repairs usually do not. When one is required, we pull it and schedule the inspection. The city's permits page is linked below under local resources.

Warning signs in an older Claremore home

Older wiring rarely fails all at once. It gives warnings, and most of them are easy to spot:

  • Switch plates or outlet covers that feel warm to the touch.
  • Lights that dim when the air conditioner or the microwave starts.
  • Outlets that will not hold a plug, or that have brown or black marks.
  • Two-prong outlets throughout the house, or three-prong outlets with no ground behind them.
  • A burning plastic smell with no obvious source.
  • Fuses instead of breakers, or a panel with no open spaces left.

A burning smell or a scorched outlet is urgent: turn off that breaker if you safely can and call. The rest are worth an inspection so you can decide what to fix and when, instead of finding out the hard way.

Remodels and additions

When a Claremore home gets a new kitchen, a finished room or an addition, the electrical work is the time to fix what the old wiring could not handle. New circuits sized for today's appliances, GFCI protection where the code wants it, and lighting planned before the walls close. We work with your contractor or directly with you, and we pull the permit.

Main panel and sub panel mounted on a garage wall with new circuits and receptacles below
New gray breaker panel in an open-stud wall, feeders connected and older branch circuits waiting to be landed

Light commercial in Claremore

About one job in ten we do is commercial: small shops, offices, retail spaces and owners with a few rental units. In a county seat with an older downtown, that usually means lighting, added circuits, failing breakers and panels that have been asked to do more than they were built for. We schedule around your business hours where we can. See commercial electrical.

After lightning

If a storm took out an appliance, a garage door opener or an HVAC control board, have the panel and the affected circuits checked, especially if you plan an insurance claim. Then protect the house with a surge protective device at the panel. See whole-house surge protection.

Claremore homeowners also ask us about adding circuits for things the original house never planned for: a home office full of equipment, a window unit in a back bedroom, a freezer in the garage. A dedicated circuit is usually a short job, and it ends the tripping for good.

Whatever the job, our office prices it by phone before anyone drives north, and the journeyman on site will walk you through the details again before he starts.

Costs and scheduling

Planned work gets a free estimate. Troubleshooting carries a diagnostic fee, which includes a roughly 20-point safety inspection of the home, and you approve the repair price before any work starts. Manufactured items we install carry a one-year warranty, and we offer financing on larger jobs.

We work Monday to Friday, 8:00 AM to 4:30 PM. Because of the drive, the best way to get a Claremore job on the schedule is to call early in the day: (918) 261-8024. You can also send a request with your address and the service you need.

Serving Claremore

Electrical services in Claremore

  • Crowded older panel with armored cable and tangled branch wiring entering the enclosure

    Electrical Wiring and Rewiring

    Old, overloaded or loosely made wiring is behind most of the problems we find. We repair what can be repaired, rewire what cannot, and add the circuits a remodel, shop or new appliance needs.

  • A new breaker panel with a surge protector mounted below it in a utility closet

    Electrical Panel Upgrade and Replacement

    Your panel is the heart of the house. When it is old, full, warm to the touch, or one of the brands inspectors flag, we replace it the right way: permitted, inspected, and coordinated with PSO.

  • Electrician testing a power cord with a Klein Tools multimeter reading 241 volts

    Electrical Troubleshooting and Repair

    Something stopped working and you do not know why. A licensed journeyman finds the actual cause, explains it in plain English, and gives you the price before anything is touched.

  • An Eaton whole-house surge protector mounted on the wall below a breaker panel

    Whole-House Surge Protection

    Oklahoma storms and power coming back after an outage send surges through every circuit at once. A surge protective device at the panel guards the whole house, not just what is plugged into a power strip.

  • Rusty older breaker panel with handwritten circuit labels on the cover

    Electrical Safety Inspection

    A clear answer on the condition of your home's electrical system: for an older house, a purchase, an insurance request after a lightning strike, or simply peace of mind.

  • Bronze candle-style chandelier hanging from a barrel-vaulted entryway ceiling

    Lighting Installation

    From one chandelier in the entry to recessed lighting through the house, we install fixtures securely, wire them to code and leave every switch doing what you expect.

Recent Google reviews

What customers say

4.9 stars across 247 Google reviews from customers across the Tulsa metro, quoted exactly as written.

  • This is the 2nd time we have had to have Hot Shots come out quickly because something went wrong. After repeated PSO outages in one day, part of our house wouldn't come back. They came the next day (we had ac) and took care of it quickly. Nothing but super helpful, reasonable...

    Florence BreslinGoogle, 2026/09
  • They did a great job. Very professional. Great price. I wouldn’t think twice to hire them again if I need electrical done.

    jbsimmons1Google, 2026/08
  • We’ve used Hot Shot Electric for many years for all of our electrical needs! They always do a wonderful job. They’re very knowledgeable, and always take such good care of our needs. I highly recommend them. They are a family owned business and take pride in their work and their...

    Sharon BorenGoogle, 2026/08

Questions

Hiring an electrician in Claremore

Where do I get an electrical permit in Claremore?
The City of Claremore handles permits through its Community Development Services office and online permit portal. When a job needs a permit, such as a panel replacement, a service upgrade or new circuits, we pull it and schedule the inspection.
How far is Claremore from your office?
About 20 miles north of our office in Broken Arrow. We schedule Claremore work ahead and ask enough questions on the phone that the journeyman arrives ready to finish, whenever the job allows.
Should an older Claremore home be rewired?
Not necessarily. Many older homes need specific repairs, not a full rewire. An electrical safety inspection tells you which circuits are fine, which need work now and which you can plan for.

Electrician in Claremore? Call us.

Licensed journeymen from Broken Arrow, a price before any work, and 247 Google reviews behind them.

Call (918) 261-8024Request service online

Monday to Friday, 8:00 AM to 4:30 PM. Closed Saturday and Sunday.

Financing available on larger projects